Guizhou Huahe Lock Co., Ltd
图片名称

1

How to remove door locks What are the installation methods for door locks?

Release time:

2022-06-01 20:19

Source:

When it comes to the best partner for a door, it has to be the door lock. The combination of a door and a lock can bring security to a house and privacy to its occupants, but what happens if the lock breaks? ? Actually, if you know how to change the lock, the first thing is how to remove the door lock? If you are planning to change the locks, the first thing you need to know is the principle of door lock removal. Besides removing it, you must also know how to install it. Here is a small guide to show you.

How to remove the door lock


How to remove the door lock, handle lock

1、First, unscrew the screws that fix the lock cylinder on the panel, and then remove the cylinder.

2. Then unscrew the remaining two screws on the panel to remove the two panels.

3. The screws on the door side lock body are also unscrewed and removed.

How to remove the latch of the ball door lock

1. Look at the handle of the lock from the opposite direction to the inside. There is a small hole in the small part of the handle. Insert a hard, thin object (such as a nail) against it and pull the handle ball out. .

2. turn the disc stuck in the door counterclockwise and you will see two screws. Remove them with a cross-tie cutter. You can pull the centre of the ball out from the outside.

3. Remove the two tired wires from the door and you can pull the lock out.

Installation method of door lock


1, when installing the door lock, according to the product instructions, first paste the newly purchased door lock paper or cardboard spacing template (provided by the manufacturer) on the door edge in the appropriate position.

2, with a hole saw with a drill according to the specified size of the lock cylinder. The drill tip should penetrate the other side of the door, and then the other side of the door will be finished drilling. (Note: Do not damage the finish on the other side of the door)

3. Drill a comfortable locking bolt hole in the side of the workstation until it attaches to the key core hole (keep the drill tip at right angles to the door). Use sandpaper to sand the edges of the hole.

4. Insert the bolt into the hole, secure it and draw the outline of the bolt plate.

5.Insert the bolt and bolt plate into the mortise with a chisel, drill the screw assembly holes, fit the screws and fix them in place.

6、Insert the outer locking core so that the locking core shaft or connecting rod fits the bolt assembly, insert the inner locking core and fix it with screws.

7, determine the correct position of the bolt on the door frame, drill a hole of the right size to fix it, (when installing the bolt with the screw, make it flush with the door frame) and you are done.

Keywords:

Huahe lock making, Huahe lock industry, Guizhou intelligent lock, Guizhou padlock, intelligent lock, padlock

preceding page

Four reasons why more and more people are choosing to change their smart locks

What if the door lock doesn't open smoothly? What causes it?

next page

Related News

From mechanical locks and security locks to electronic locks, one article teaches you how to choose a convenient and secure security lock!

In ancient times there was theft. No matter what era, there are always people who are greedy for money and dare to take risks. With the development of science and technology, all kinds of anti-theft measures are emerging. The most basic and important anti-theft measures are door locks. This time, let's talk about how to choose a safe anti-theft door lock.

Mechanical key interlocks in power plants

Mechanical plug-in key interlocking for electrical equipment is a safe operating system that must be operated in a prescribed sequence to prevent human error, otherwise no subsequent operation can be carried out to ensure the safety of personnel and equipment. The interlocking method is simple, reliable, direct and effective, especially suitable for interlocking between multiple cabinets or doors. Operators are easy to identify and eliminate misoperation. Widely used in power plants, metallurgy and other fields.

Why should you look at the lock tongue when choosing a smart lock?

When choosing a smart lock, people tend to focus on the lock cylinder and other components, neglecting to examine the lock tongue. In fact, the lock tongue also has an important impact on the performance of the smart lock. As an important force-bearing component, the tongue has strict requirements for the firmness of the material. Our common lock tongue materials are zinc alloy, stainless steel and so on. Generally speaking, stainless steel compared to zinc alloy material in the strength of the performance is better, the impact is not easy to deformation. In addition, stainless steel also has corrosion resistance, high temperature resistance and other characteristics. Tilt tongue with spring components, criminals often through a card can easily top the tongue back, so as to achieve the purpose of unlocking, security performance is a concern. If you only rely on the tongue for anti-theft, not anti-lock and other operations, you have heard of the card unlocking burglary may be staged in real life. Compared to a tilt cam, a square cam does not have a spring loaded part and will not retract due to external forces such as a card being squeezed. The number of cams may vary depending on the body of the lock, and there are single cams and multiple cams. Compared with the single locking tongue, multiple locking tongue encountered violent opening, pry open a locking tongue, will not cause a fatal blow to the anti-theft function. The main locking tongue has anti-sawing, anti-collision function, effectively preventing violent unlocking. After the door is pried open, the induction tongue pops out and an alarm will sound. Lock tongue is also an important part of the lock body, poor quality lock tongue will have a significant impact on the performance of the lock body. Choose a smart lock with a high-quality lock tongue, enjoy the new smart life.

What is the difference between a fire door lock and a regular door lock?

Fire door lock is a kind of locks with fireproof performance, mainly used in fire doors. Fire door locks can prevent theft, but also can control the flow of people, to prevent unauthorised departure, commonly used in malls, buildings, damp, office buildings and other more densely populated places.

Four reasons why more and more people are choosing to change their smart locks

At present, as more and more families begin to use smart locks, the role of the key is slowly being diluted. Those who have used them say that smart locks are good, exactly where is it good? Now we will give you a list of several reasons to choose to install smart locks, see if you poke you.

< 123 > proceed page